GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted
Green Basics

Passive House video — Episode 2

Watch “Airtight Mudsills,” the second episode in a series of videos on the theory, design, and construction of a Passive House in ­Falmouth, Massachusetts

This video is only available to GBA prime members

Built to meet the world’s most rigorous standard for energy-efficient construction, a Passive House uses about one-tenth as much heating energy as a similarly sized older home. This feat is accomplished by carefully harmonizing countless design and construction details. At the time of this writing, just 71 houses have earned the Passive House Institute U.S. (PHIUS) certification.

Watch the video above; read the companion Fine Homebuilding article at right; and then join the conversation with the designer of this house, Architect Steve Baczek.

Over the course of the next several months — as each new issue of Fine Homebuilding magazine is released — this collection of articles and videos will cover:

Passive House design

Airtight mudsills

Superinsulated slab

Double-stud walls and insulation

Windows and doors

To watch Episode 1 of this video series, click here.

Built to meet the world’s most rigorous standard for energy-efficient construction, a Passive House uses about one-tenth as much heating energy as a similarly sized older home. This feat is accomplished by carefully harmonizing countless design and construction details. At the time of this writing, just 71 houses have earned the Passive House Institute U.S. (PHIUS) certification.

Watch the video above; read the companion Fine Homebuilding article at right; and then join the conversation with the designer of this house, Architect Steve Baczek.

Over the course of the next several months — as each new issue of Fine Homebuilding magazine is released — this collection of articles and videos will cover:

Passive House design

Airtight mudsills

Superinsulated slab

Double-stud walls and insulation

Windows and doors

To watch Episode 1 of this video series, click here.

One Comment

  1. ErgoDesk | | #1

    Mudsill Follies
    Those problems mentioned in the clip, are redundant if the builder uses Structural EPS "Geofoam" for constructing the entire basement. Not only will you get SUPER INSULATION, but you avoid almost every problem associated with moisture.

Log in or become a member to post a comment.

Related

  • Green Basics

    Passive House video — Episode 5

    In “Installing High-Performance Windows,” the fifth episode in a series of videos on a Passivhaus project, the crew installs triple-glazed Makrowin windows from Slovakia

  • Green Basics

    Passive House video — Episode 4

    In “Framing for Efficiency,” the fourth episode in a series of videos on Passivhaus construction, the framing crew erects double-stud walls

  • Green Basics

    Passive House video — Episode 3

    In “Superinsulated Slab,” the third episode in a series of videos on Passivhaus construction, the crew installs 10 inches of rigid foam. After the concrete was placed, more rigid foam was installed above the slab. The finished floor assembly is rated at R-50.

  • Green Basics

    Passive House Video — Episode 1

    Watch “Passive House Design,” the first episode in a 5-part video series on the theory, design, and construction of a Passive House. To see the entire series, click here to become a GBA Prime member.

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |